Sliding gate operator kit for gates up to 1000kg/12m NICE Robus RB1000P (D)
| Product availability: | In stock | We normally dispatch goods within 24 hours. |
|---|
In stock
€1,057.56 including VAT
| Weight |
|---|
| 17 kg |
Description of Sliding gate operator kit for gates up to 1000kg/12m NICE Robus RB1000P (D)
NICE Robus RB1000P drive is designed for sliding gates with a weight of up to 1000 kg and a passage width of up to 12 m. It has an inductive stop switch. The drive is non-reversible. Manual for download ».
| The set includes: | NICE-RB1000P-D | |||
|---|---|---|---|---|
 |
1 × | NICE Robus RB1000P operator | NICE-RB1000P | |
|
NICE Robus RB1000P electromechanical operator with RBA3R10 control unit, for gates weighing up to 1000 kg and with a leaf length of up to 12m. |
Detail  |
|||
 |
1 × | NICE MYGO4 remote control | NICE-MYGO4 | |
|
Four-button remote control for opening a gate automatically from a distance. Use it to control four devices or send four different commands to a single device. Compatible with all NICE operators using O-Code rolling-code technology (the 72-bit code offers 4.7 quadrillion combinations, making it virtually impossible to misuse) and an LED indicator for the transmitted signal. |
Detail |
|||
 |
1 × | Pair of NICE Era Photocell EPMB photocells | NICE-EPMB | |
|
Safety photocells are installed on either side of the opening. They generate an infrared beam. When it is interrupted—for example, by a car or pedestrian—they send a signal to the operator to stop the gate or prevent it from opening. |
Detail |
|||
 |
1 × | NICE ELDC LED beacon with antenna |
NICE-ELDC | |
|
NICE LED flashing ELDC warning light, made of impact-resistant polycarbonate and fitted with a built-in antenna for greater remote-control range (up to 150 m). |
Detail |
|||
 |
1 × | NICE OXIBD receiver | NICE-OXIBD | |
|
Radio signal receiver for remote controls. |
Detail |
|||
 |
2 × | Release key | ||
|
In the event of a power failure, it disengages the operator's gear wheel so the gate can be moved manually by pushing or pulling. |
||||
 |
1 × | NICE Robus RB1000P installation manual | ||
|
Installation manual for successful installation, with wiring diagrams and instructions for programming and pairing remote controls. |
Download |
|||
 |
2 × | Limit stop (left + right) | ||
|
The operator limit stops are mounted on the rack and define the gate's travel distance. |
||||
| 1 × | Mounting accessories | |||
|
Operator mounting components, height-adjustment screws, mounting plate, anchor caps and limit stops for the operator sensor. |
||||
How can I order this item?
Choose the option that suits you:
- order online: use the buy button to add the goods to your shopping cart (you will find the buy button here in the product variants table).
- order by email: place your order at [email protected]
