Kit for making a self-supporting sliding gate up to 320 kg/5 m, AL 95x106

NEW AL


Product availability: In stock

We normally dispatch goods within 24 hours.

Kit for making a self-supporting sliding gate up to 320 kg/5 m, AL 95x106 Kit for making a self-supporting sliding gate up to 320 kg/5 m, AL 95x106
SADA-49
In stock
€708.54 excluding VAT
€871.50 including VAT

 pcs
Weight
65 kg

Description of Kit for making a self-supporting sliding gate up to 320 kg/5 m, AL 95x106

Note: The SET is offered at a favourable price compared with the individual components. If you wish, we can adjust the contents of the SET and deduct an appropriate discount. If you have a specific request or would like advice, contact us.

Set SADA-49 contains:
Trolley with 8 bearing rollers 2 × Trolley with 8 bearing rollers V-07-1

Trolley made of galvanized steel with eight nylon rollers fitted with bearings.

 Details
C-profile 95x106 mm, AL, 6m 1 × C-profile 95x106 mm, AL, 6m CP-AL-95x106-6

C-channel guide profile for a cantilever gate, designed to house the rack inside. The gate runs on carriages anchored in a concrete foundation. Unfinished, raw aluminum.

 Details
Lower guide ramp - galvanized, 95x100 mm 1 × Lower guide ramp - galvanized, 95x100 mm SN-1-100

The end roller is fitted at the beginning of the C-profile and runs into the lower end stop mounted on the closing post, relieving the gate when closed.

 Details
Run-in pocket – lower stop 95x100 1 × Run-in pocket – lower stop 95x100 DK-1-95

Run-off pocket mounted at the bottom of the gate stop post. Relieves the compressive and tensile forces acting on the roller carriages when the gate is closed.

 Details
C-profile cover cap 95x106 mm 2 × C-profile cover cap 95x106 mm SK-95-106

The end cap for the sliding gate C-profile is installed at the beginning and, if required, at the end of the guide C-profile. It is attached to the C-profile with screws.

 Details

How can I order this item?

Choose the option that suits you:

  1. order online: use the buy button to add the goods to your shopping cart (you will find the buy button here in the product variants table).
  2. order by email: place your order at [email protected]

Ask us anything about Kit for making a self-supporting sliding gate up to 320 kg/5 m, AL 95x106

Product: Kit for making a self-supporting sliding gate up to 320 kg/5 m, AL 95x106
Name:
Email:
Phone:
Message:
This page is protected by Google reCAPTCHA.
Print page Print page