Kit for building a cantilever sliding gate with a clear opening width of 6.5 m, 9 rollers
| Product availability: | In stock | We normally dispatch goods within 24 hours. |
|---|
| Available variant types for this product Kit for building a cantilever sliding gate with a clear opening width of 6.5 m, 9 rollers | ||
| Guide type: larger set: |
Top guide Use it if the infill of your gate (e.g. wooden slats, polycarbonate, expanded metal) does not extend above the gate. Secure it to the existing fence or to an alignment post. |
|
|---|---|---|
|
Side
guide Top
guide |
||
€460.74 including VAT
| C-channel dimensions | Weight |
|---|---|
| 80 × 80 × 5 | 112 kg |
Description of Kit for building a cantilever sliding gate with a clear opening width of 6.5 m, 9 rollers
Component kit for building a cantilever gate in the highest quality with highly reliable load-bearing bearings.
Note: The KIT is discounted compared with purchasing the components individually at a special price. We can customize the KIT contents on request and apply an appropriate discount. If you have a specific request or would like some advice, contact us.
New!
We currently offer C-section 80x80x5, 9 metres in total length (one piece).
This profile is available for in-store collection only at our store in Nové Mesto nad Váhom. For more information, please feel free to contact.
| The kit includes: | SADA-06-K9 | |||
|---|---|---|---|---|
 |
2 × | 9-bearing roller carriage | V-09-1K | |
|
All-metal adjustable swing carriage for cantilever sliding gates. Suitable for gates with a clear opening of up to 6.5 m and a maximum weight of 420 kg. The carriage is supplied with a mounting plate included in the price. |
Detail  |
|||
 |
6+3 m | C-section, unfinished | CP-80-6 + CP-80-3 |
|
|
Thick-walled C-shaped guide profile welded to the underside of the gate, allowing it to run on carriages anchored in a concrete foundation. Unfinished, raw steel. C-sections can be joined by welding |
Detail |
|||
 |
1 × | Lower guide-in roller | SN-1-80 | |
|
The guide-in roller is fitted to the end of the C-section and rolls into the lower catch mounted on the gate stop post, relieving the gate when closed. |
Detail |
|||
 |
1 × | Lower catch | DK-1-80 | |
|
The catch is mounted at the bottom of the gate stop post. It relieves the carriages of the compressive and tensile forces acting on them when the gate is closed. |
Detail |
|||
 |
1 × | Gate guide | ||
|
Gate guide for vertical stabilization of the gate in the transverse direction. Choose either a top guide (1 × VVR-2-G) or a side guide (2 × BR-43G). |
Side Top |
|||
 |
1 × | Metal C-section end cap | SK-1-80 | |
|
The sliding gate C-section end cap is fitted at the beginning and, if needed, at the end of the guide profile. It slides into the C-section and is secured to it with a clamping plate. |
Detail |
|||
How can I order this item?
Choose the option that suits you:
- order online: use the buy button to add the goods to your shopping cart (you will find the buy button here in the product variants table).
- order by email: place your order at [email protected]
