Fence slat, anthracite, 120x12mm
| Product availability: | In stock | We normally dispatch goods within 24 hours. |
|---|
within 7 days
€13.16 including VAT
| Length [m] | Weight |
|---|---|
| 1 m | 1,70 kg |
within 7 days
€15.78 including VAT
| Length [m] | Weight |
|---|---|
| 1,2 m | 2,04 kg |
in stock
€19.73 including VAT
| Length [m] | Weight |
|---|---|
| 1,5 m | 2,55 kg |
within 7 days
€26.32 including VAT
| Length [m] | Weight |
|---|---|
| 2 m | 3,40 kg |
Description of Fence slat, anthracite, 120x12mm
PILWOOD® fence boards Made from WPC (wood-plastic composite), combining 60% wood with 40% high-quality, non-toxic HDPE polymer. Pilwood fence boards are an excellent choice thanks to their high durability and long service life with no need for protective coatings.
They are one of the most durable, long-lasting, maintenance-free materials for your fence. The fence boards are made in the Czech Republic and feature a high-quality, fully coloured profile.
| Anthracite fence board, exterior | Anthracite fence board, interior |
|---|---|
 |
 |
Each size is available in 5 colours - anthracite (ebony), grey (stainless steel), red-brown (merbau), sand (cedar), brown (rosewood) and 4 different lengths - 1 metre, 1.2 metres, 1.5 metres, 2 metres.
| Sand | Brown | Red-brown | Grey | Anthracite |
|---|---|---|---|---|
 |
 |
 |
 |
 |
Pilwood fence board installation guide
Vertical installation of fence boards
Support profiles
- Choose the longitudinal support profiles to suit your requirements.
- The recommended maximum overhang beyond the support profile at both the top and bottom is 150mm.
- The recommended maximum spacing between support profiles is 780mm.
- Two support profiles are sufficient for fence boards up to 1.2m long; three support profiles are recommended for longer boards.
- The support profiles are easily fastened to the post using a small L-shaped bracket
Fastening a fence board
- Fasten the fence board to the support profile using a 4.8x25mm rivet
- Pre-drill the hole in both the fence board and the profile with a 5mm drill bit.
- If using two rivets, keep them at least this far from the edge of the fence board: 16mm
Fence board fastening options
- Leave a gap of at least 5mm between fence boards to allow for thermal expansion.
Option A 
Option B 
Horizontal installation of fence boards
Support profiles
- For horizontal installation, the fence board should be no longer than 1.5m.
- When using a 2m fence board, it must be reinforced at its midpoint with a support, such as a profile.
- The fence boards themselves are fastened to the post using a large L-shaped bracket
Fastening a fence board
- Fasten the fence board to the L-shaped bracket using a M6x20 carriage bolt
- Pre-drill the hole in the fence board with a 6mm drill bit.
- If using two bolts, keep them at least this far from the edge of the fence board: 16mm
Fence board fastening options
- Leave a gap of at least 5mm between fence boards to allow for thermal expansion.
Manuals and documents to download
How can I order this item?
Choose the option that suits you:
- order online: use the buy button to add the goods to your shopping cart (you will find the buy button here in the product variants table).
- order by email: place your order at [email protected]
