CAIS Complete kit for manufacturing a two-section telescopic cantilever gate with a clear opening width of up to 4.25 m, FOLLOW ME "S" 4.25
| Product availability: | In stock | We normally dispatch goods within 24 hours. |
|---|
in stock
€1,263.74 including VAT
| Weight |
|---|
| 94 kg |
Description of CAIS Complete kit for manufacturing a two-section telescopic cantilever gate with a clear opening width of up to 4.25 m, FOLLOW ME "S" 4.25
| Set CAIS-FOLLOW-ME-S contains: | ||||
|---|---|---|---|---|
|
2 × | SPEED S trolley with eight bearing rollers | CAIS-SPEED-S | |
|
Galvanized steel trolley with 8 metal wheels. |
Details 
|
|||
|
2 × | Trolley with eight bearing rollers | CAIS-FOLLOW-V | |
|
Galvanized steel trolley with 8 metal wheels and a modified base for mounting to a C-profile. This prepared mounting method ensures that both gates in the telescopic system are at the same height. |
Details
|
|||
|
4+3,4 m | C-profile 73x61x3.5mm with holes for bolting, Zn | CAIS-STAGE-SZ | |
|
The C-guide profile for sliding gates is fitted to the underside of a cantilever sliding gate (usually by welding). |
Details
|
|||
|
1 × | Bottom ramp – for C-profile 73x61x3.5 | CAIS-RUN-S | |
|
The bottom guide ramp for a sliding gate slides into the C-profile and is secured to it with a clamping plate. When the gate closes, the ramp engages with the bottom stop to relieve the load on the gate. |
Details
|
|||
|
1 × | C-Profile End Cap 73x61x3.5 | CAIS-PILOT-SN | |
|
The end cap for a sliding gate C-profile is fitted at the beginning and, if required, at the end of the guide C-profile. It slides into the C-profile and is secured to it with a clamping plate. |
Details
|
|||
|
2 × | Stop bracket | CAIS-PARK | |
|
Bracket designed for mounting a lower or upper gate stop. |
Details
|
|||
|
1 × | Upper gate stop | CAIS-PADDOCK-SM | |
|
It is used to stop the gate at its end position. |
Details
|
|||
|
1 × | Gate side guide | CAIS-JRS30 | |
|
Side guide with a galvanized finish and a plastic-coated roller with a diameter of 31 mm. |
Details
|
|||
|
1 × | Nylon guide roller | CAIS-RR-30 | |
|
Nylon roller with a diameter of 31 mm. |
Details
|
|||
|
4+3,4 m | U-shaped guide profile | CAIS-DRIVER-38-3 | |
|
It is used to guide the sliding gate. |
Details
|
|||
|
1 × | Telescopic mechanism kit | CAIS-TELESKOP | |
|
The set includes components for a telescopic gate |
Details
|
|||
Using a telescopic mechanism
This solution is used in places, where there is not enough room to open a standard cantilever gate. The opening is notionally divided into two sections, and each of the two gate panels covers approximately half of the opening. When open, the gate therefore needs 36% less space than a standard cantilever gate.
Complete means that the package includes everything: lower guide C-profiles, carriages, upper guide, cables and a carefully designed guide mechanism that transfers force from one gate panel to the other (see full package contents). All you need to do is make two frames and screw or weld them to the C-profiles.
The carriages are designed, so they can be anchored directly, without any modifications, to the concrete foundation (the first pair of carriages) and to the gate frame (the second pair of carriages). As a result, the bottom edges of both gate panels line up at the same height, without needing to adjust the carriages. If you make two frames, you can complete the installation on site without welding, using only basic tools (drill, socket wrench set, etc.).
Cable mechanism transfers force from one gate panel to the other, whether the force comes from the drive or from manual operation. Both gates therefore move simultaneously.
Main benefits of the Follow Me 4.25 telescopic system
- Space saving – compared with a standard cantilever gate, you can save up to 36% of the space needed to install the gate.
- Speed – the gate opens and closes twice as fast as a standard cantilever gate.
- Super-easy installation – the kit is designed for easy installation without welding. Every component has been carefully thought through down to the last detail.
- Durability and functionality – all components are galvanized and tested.
- Adjustability – the second gate panel can be adjusted in three directions as needed.
With a conventional sliding gate, the entire gate length must slide back to open it. If you have a wide opening but not enough room for the gate to slide back, a telescopic mechanism is a suitable solution. This mechanism divides your opening into two overlapping panels that slide alongside each other. This lets you save up to 36% of the space needed to install the gate.
Compared with a conventional gate installation, the telescopic system offers up to twice the speed. A telescopic gate consists of two sections: the first is driven by the sliding gate operator, and the second is pulled by a cable system. When the rear section opens, the cable system pulls the front section twice as fast as the rear one.
Installation of the telescopic kit is made as simple as possible. The components are precisely designed to perform their intended functions. There is no need to figure anything out on site. The C-profile has pre-drilled anchor holes, and the package also includes screws for securing the gate frame.
The kit is made from high-quality German steel, and all components are galvanized. It was tested for 32,000 cycles without failure at temperatures from –37°C to +50°C.
The kit allows the second (front) gate panel to be adjusted in three directions, helping you achieve smooth, precise gate movement and minimize mechanical resistance.
Telescopic gate operator
A telescopic gate can be automated using a standard sliding gate operator. The rack is fitted to only one of the gates; the second gate panel (which is driven by force transmitted from the first) moves at twice the speed of the first panel. A telescopic gate therefore opens faster than a standard cantilever gate. Standard 24 V sliding gate operators (e.g. NICE Robus) have adjustable speeds, allowing you to set the gate's travel speed to suit your needs.
Technical information
Telescopic kit for clear opening widths of: 2.75 m to 4.25 m
Combined weight of both gate frames: max. 325 kg
Material: hot-dip galvanized and electro-galvanized steel
Operating temperature: –37 °C to 50 °C
The manufacturer's original designation is CAIS FOLLOW ME SET S 4.25.
Video guide to installing a telescopic gate:
Original manufacturer code: CAIS KIT FOLLOW ME „S“ 4.25 1710900
How can I order this item?
Choose the option that suits you:
- order online: use the buy button to add the goods to your shopping cart (you will find the buy button here in the product variants table).
- order by email: place your order at [email protected]
