Aluminum fence slat 80x16 mm, rectangular shape, RAL9007 gray, smooth finish
| Product availability: | In stock | We normally dispatch goods within 24 hours. |
|---|
in stock
€68.98 including VAT
| Length [m] | Weight |
|---|---|
| 6m +/- 5mm | 4,41 kg |
in stock
€34.51 including VAT
| Length [m] | Weight |
|---|---|
| 3m +/- 5mm | 2,21 kg |
in stock
€23.01 including VAT
| Length [m] | Weight |
|---|---|
| 2m +/- 5mm | 1,47 kg |
Description of Aluminum fence slat 80x16 mm, rectangular shape, RAL9007 gray, smooth finish
Aluminium slat, with a finish in grey RAL 9007, can be used as infill for a fence, gate or any other area. The slat has a rectangular shape with a height of 80 mm and a width of 16 mm, and is supplied in lengths of 2 m, 3 m or 6 m.
The slat is hollow and on the inside of its sides has guide grooves for the fastening screws. The easiest way to install it is using mounting profiles with pre-drilled grooves for accurate drilling and fastening with screws.
RECTANGULAR ALUMINIUM SLAT PATTERNS:
In combination with a mounting profile you can create a vertical pattern:
 |
 |
Depending on the desired effect, aluminium slats of different heights can also be alternated. Our range also includes a 20 mm rectangular slat without a finish, or an anodised slat, both ideal for creating modern patterns.
INSTALLATION METHODS FOR RECTANGULAR ALUMINIUM FENCE SLATS:
How to mount the slats vertically in a U-channel (20.5 mm wide):
 |
 |
The slats can also be installed vertically using end caps, which are inserted into the slat from above.
FINISH:
Aluminium is generally an excellent material with good resistance to corrosion and weathering, and a long service life. The slat is made from EN AW-6060 T66 aluminium and supplied with a grey RAL 9007 finish.
The profile is powder-coated to create a smooth finish. After application, the powder coating is cured in an oven.
This finish is characterised by a long service life and resistance to UV radiation and yellowing. It is intended for use in construction, where durability of colour and gloss is essential.
Please note
The manufacturing process requires at the ends of profiles with a powder-coated finish approximately 1 cm of profile to be left at each end for holding during painting. A small hole is located at the end of the profile and should be taken into account. If necessary, the end can easily be cut off or concealed inside the mounting profile.
SUITABLE FASTENING SCREWS:
Screws with countersunk heads DIN 7982 3.5x19 mm
Realistic photos of the grey aluminium slat:
TECHNICAL SPECIFICATIONS OF THE ALUMINIUM SLAT FOR GATE AND FENCE INFILL:
Material: natural aluminium (EN AW-6060 T66)
Finish: Grey RAL 9007 – smooth finish
Dimensions: 80x16 mm
Length: 2,000 mm, 3,000 mm, 6,000 mm
Weight: 1.470 kg, 2205 kg, 4.022 kg
How can I order this item?
Choose the option that suits you:
- order online: use the buy button to add the goods to your shopping cart (you will find the buy button here in the product variants table).
- order by email: place your order at [email protected]
