Sliding gate with a pedestrian gate, installed as a DIY project - Lučenec
Components used:
5m CP-ZN-70 - C-profile 70x70x4 mm, Zn – hot-dip galvanized
2x V-02-3 - Adjustable swing trolley with 5 rollers and mounting plate
SN-1-70 - Bottom guide roller – galvanized, 70x70
DK-1-70 - Narrow end stop catcher for 70x70 profile
VVR-3-G - Top guide with two adjustable rubber-coated rollers
VVR-11 - Top guide with two adjustable nylon rollers
SK-1-70 - End cap for a cantilever gate C-profile – galvanized, 70x70
UB-40-100 - Adjustable upper gate stop – width 40-99mm
NICE-RB400-D - Drive kit for sliding gates up to 400kg/7m, NICE Robus RB400 (D)
4m LZ-1-1 - Plastic-coated rack 30x20mm, with 12x12mm steel core, M4
15x LS-Z1-3 - Galvanized Z-shaped fence slat for size S profile, S2 plan view, 3 m long
8x LS-U1 - Galvanized U-shaped mounting profile for slats, size S, 2 m long
25x LS-Z1-C - LS-Z1 Z-profile 20x30x20x1.5mm, black steel, 2m – piece
50x LS-Z1-3 - Galvanized Z-shaped fence slat for size S profile, S2 plan view, 3 m long
