Kit for building a cantilever sliding gate up to 6.5 m, AL 83x79x11
AL| Product availability: | In stock | We normally dispatch goods within 24 hours. |
|---|
In stock
€962.81 including VAT
| Weight |
|---|
| 65 kg |
Description of Kit for building a cantilever sliding gate up to 6.5 m, AL 83x79x11
Note: The SET is price-discounted compared with the individual components at a discounted price. At your request, we can modify the contents of the SET and deduct an appropriate discount. If you have a specific request or would like advice, contact us.
| The set includes: | SADA-41 | ||
|---|---|---|---|
 |
2 × | Adjustable swing trolley, 8 rollers | V-07-3 |
|
Adjustable swing trolley for sliding gates, with nylon rollers. Nylon rollers support heavy gate loads, prevent wear on the C-profile and ensure quiet operation. |
Detail  |
||
 |
1×6 m 1×3 m |
Aluminium C-profile 83x79x11 mm, AL | CP-AL-83x79 |
|
A thick-walled aluminium C-shaped guide profile welded to the underside of the gate, allowing it to run on trolleys anchored in a concrete foundation. |
Detail |
||
 |
1 × | Bottom guide roller | SN-347M |
|
The guide roller is fitted at the beginning of the C-profile and runs into the bottom stop mounted on the closing post, relieving the gate when closed. |
Detail |
||
 |
1 × | Closing catch – bottom stop | DK-1-80 |
|
The closing catch is fitted at the bottom of the closing post. It relieves the pushing and pulling forces acting on the trolleys when the gate is closed. |
Detail |
||
 |
2 × | C-profile end cap | SK-20M |
|
The end cap for a sliding gate's C-profile is fitted at the beginning and, if required, at the end of the guide C-profile. It slides into the C-profile and is secured to it with screws. |
Detail |
||
How can I order this item?
Choose the option that suits you:
- order online: use the buy button to add the goods to your shopping cart (you will find the buy button here in the product variants table).
- order by email: place your order at [email protected]
