Kit for building a cantilever sliding gate up to 4.5 m, stainless steel/galvanized, 58x58x3

INOX Zn


Product availability: In stock

We normally dispatch goods within 24 hours.

Kit for building a cantilever sliding gate up to 4.5 m, stainless steel/galvanized, 58x58x3 Kit for building a cantilever sliding gate up to 4.5 m, stainless steel/galvanized, 58x58x3
SADA-30
in stock
€434.07 excluding VAT
€533.91 including VAT

 pcs
C-channel dimensions Weight
58x58x3 38 kg

Description of Kit for building a cantilever sliding gate up to 4.5 m, stainless steel/galvanized, 58x58x3

All components except the C-profile are made of galvanized steel. The C-profile is made of stainless steel (INOX).

Note: The KIT is more cost-effective than purchasing the components individually more cost-effective. If you wish, we can adjust the contents of the KIT and deduct an appropriate discount. If you have a specific request or would like some advice, contact us.

Set SADA-30 contains:
Adjustable trolley with five bearing rollers, zinc-plated 2 × Adjustable trolley with five bearing rollers, zinc-plated V-02-12

Trolley made of galvanized steel with five bearing rollers.

 Details
Stainless steel C-channel 58x58x3mm, 6m 1 × Stainless steel C-channel 58x58x3mm, 6m CP-INOX-58-6

Stainless steel C-channel guide profile welded to the bottom of the gate, allowing it to run on carriages anchored in the concrete foundation.

 Details
Galvanized lower guide ramp 1 × Galvanized lower guide ramp SN-1-60

The guide roller is mounted at the beginning of the C-profile and rolls into the lower stop mounted on the closing post, relieving the gate when closed.

 Details
Galvanized steel bottom stop 1 × Galvanized steel bottom stop DK-1-60

Run-off pocket mounted at the bottom of the gate stop post. Relieves the compressive and tensile forces acting on the roller carriages when the gate is closed.

 Details
Galvanized C-profile end cap 1 × Galvanized C-profile end cap SK-1-60

The cover cap for a sliding gate C-profile is fitted at the beginning and, if required, at the end of the guide C-profile. It slides into the C-profile and is secured to it with a clamping plate tightened using two screws.

 Details

How can I order this item?

Choose the option that suits you:

  1. order online: use the buy button to add the goods to your shopping cart (you will find the buy button here in the product variants table).
  2. order by email: place your order at [email protected]

Ask us anything about Kit for building a cantilever sliding gate up to 4.5 m, stainless steel/galvanized, 58x58x3

Product: Kit for building a cantilever sliding gate up to 4.5 m, stainless steel/galvanized, 58x58x3
Name:
Email:
Phone:
Message:
This page is protected by Google reCAPTCHA.
Print page Print page