Bottom guide ramp - galvanized, 60x60
| Product availability: | In stock | We normally dispatch goods within 24 hours. |
|---|
in stock
€16.28 including VAT
| for C-profile | A [mm] |
Weight |
|---|---|---|
| 58×58×3mm 60×60×4mm |
60 | 0,80 kg |
Description of Bottom guide ramp - galvanized, 60x60
Bottom guide for sliding gate is installed at the beginning, and optionally also at the end of the supporting C-profile. It slides into the C-profile and is secured to it with a pressure plate tightened using two screws. When the stopping sliding gate, the gate does not hit the bottom stop (e.g. end stop pocket) with its body, but with the wheel bottom guide. In practice, when the guide wheel contacts the downward-bent section end stop pocket guides the gate to the correct height, and when the gate is closed it “rests” in this end stop pocket.
An additional option is to fit a bottom guide and bottom stop (end stop pocket) at the end of the C-profile as well, for sliding gates intended to remain open for long periods.
The bottom guide is available in the following versions:
- SN-1-60: bottom guide for C-profile 58x58x3mm (stainless steel), 60x60x4mm (steel) and 60x60x4mm (galvanized)
Alternative gate components include:
- Bottom guide with internal stop - a bottom guide combined with an internal gate stop.
How can I order this item?
Choose the option that suits you:
- order online: use the buy button to add the goods to your shopping cart (you will find the buy button here in the product variants table).
- order by email: place your order at [email protected]
