Kit for building a cantilever sliding gate up to 4.5 m, INOX/ZN 76x76x3
INOX Zn| Product availability: | In stock | We normally dispatch goods within 24 hours. |
|---|
| Available variant types for this product Kit for building a cantilever sliding gate up to 4.5 m, INOX/ZN 76x76x3 | ||
| Roller type: |
You can choose the rollers nylon or metal. Nylon rollers allow the gate to carry a heavy load, prevent wear on the C-profile and ensure quiet gate operation. |
|
|---|---|---|
|
Nylon
rollers Metal
rollers |
||
€750.89 including VAT
| C-channel dimensions | Weight |
|---|---|
| 76x76x3 | 44 kg |
Description of Kit for building a cantilever sliding gate up to 4.5 m, INOX/ZN 76x76x3
All components except the C-profile are made of galvanized steel. The C-profile is made of INOX (stainless steel).
Note: The SET is compared with individual components offered at a discounted price. If you wish, we can adjust the contents of the SET and deduct an appropriate discount. If you have a specific request or would like some advice, contact us.
| The set includes: | ||||
|---|---|---|---|---|
 |
2 × | Five-bearing roller carriage | V-02-1 | V-02-5 |
|
You can choose nylon or metal rollers. Nylon rollers support heavy gate loads, prevent wear on the C-profile and ensure quiet gate operation. Nylon and metal rollers are the same price |
||||
 |
6 m | Stainless steel C-profile 76x76x3mm |
CP-INOX-76 |
|
|
A stainless steel C-shaped guide profile welded to the underside of the gate, allowing it to run on carriages anchored in a concrete foundation. C-profiles can be joined by welding. |
||||
 |
1 × | Galvanized bottom guide roller |
SN-1-80 |
|
|
The guide roller is fitted at the start of the C-profile and rolls into the bottom catch mounted on the gate stop post, relieving the gate when it is closed. |
||||
 |
1 × | Galvanized steel bottom catch |
DK-1-80 |
|
|
The end catch is mounted at the bottom of the gate stop post. It relieves the compressive and tensile forces acting on the carriages when the gate is closed. |
||||
 |
1 × | C-profile end cap |
SK-1-80 |
|
|
The end cap for a sliding gate's C-profile is fitted at the start and, if required, at the end of the guide C-profile. It slides into the C-profile and is secured with a pressure plate, which is tightened with two screws. |
||||
How can I order this item?
Choose the option that suits you:
- order online: use the buy button to add the goods to your shopping cart (you will find the buy button here in the product variants table).
- order by email: place your order at [email protected]
