Fence board, brown, 90x16mm
| Product availability: | replaced | This product is no longer manufactured, but fortunately it has been replaced by a newer model. |
|---|
Description of Fence board, brown, 90x16mm
PILWOOD fence boards in 90x16mm have been replaced.
As an alternative, you can choose fence boards PILWOOD SAND in 98x12mm, or fence boards PILWOOD in 120x12mm.
PILWOOD® fence boards Made from WPC (wood-plastic composite), combining 60% wood with 40% high-quality, non-toxic HDPE polymer. Pilwood fence boards are an excellent choice thanks to their high durability and long service life with no need for protective coatings.
They are one of the most durable, long-lasting, maintenance-free materials for your fence. The fence boards are made in the Czech Republic and feature a high-quality profile with color throughout.
| Brown fence board, exterior side | Brown fence board, interior side |
|---|---|
 |
 |
Each size is available in 5 colors - anthracite (ebony), grey (inox), red-brown (merbau), sand-colored (cedar), brown (rosewood) and 4 different lengths - 1 metre, 1.2 metres, 1.5 metres, 2 metres.
| Sand-colored | Brown | Red-brown | Grey | Anthracite |
|---|---|---|---|---|
 |
 |
 |
 |
 |
Pilwood fence board installation instructions
Vertical installation of fence boards
Support profiles
- Choose the longitudinal support profiles to suit your requirements
- The recommended maximum overhang beyond the support profile at both the top and bottom is 150mm
- The recommended maximum spacing between support profiles is 780mm
- Two support profiles are sufficient for fence boards up to 1.2m long; three are recommended for longer boards
- The support profiles are easily fastened to the post using a small L-shaped clip
Fastening a fence board
- Fasten the fence board to the support profile using a 4.8x25mm rivet
- Pre-drill a hole through both the fence board and the profile using a 5mm drill bit
- If using two rivets, keep them at least this far from the edge of the fence board: 16mm
Fence board fastening options
- Leave a gap of at least 5mm between fence boards to allow for thermal expansion
Option A 
Option B 
Horizontal installation of fence boards
Support profiles
- For horizontal installation, fence boards should be no longer than 1.5m.
- If using a 2m fence board, it must be reinforced at the midpoint with a support, such as a profile.
- The fence boards themselves are fastened to the post using a large L-shaped clip
Fastening a fence board
- Fasten the fence board to the L-shaped clip using a M6x20 carriage bolt
- Pre-drill a hole in the fence board using a 6mm drill bit
- If using two bolts, keep them at least this far from the edge of the fence board: 16mm
Fence board fastening options
- Leave a gap of at least 5mm between fence boards to allow for thermal expansion
Manuals and documents to download
How can I order this item?
Choose the option that suits you:
- order online: use the buy button to add the goods to your shopping cart (you will find the buy button here in the product variants table).
- order by email: place your order at [email protected]
