Complete kit for building a two-panel telescopic cantilever gate with a clear opening width of up to 5.5 m
| Product availability: | Up to 6 weeks | The goods will be with you within 6 weeks. This lead time may be significantly shorter, so it’s best to check the current delivery time. |
|---|
Up to 6 weeks
€2,496.05 including VAT
| Weight |
|---|
| 233 kg |
Description of Complete kit for building a two-panel telescopic cantilever gate with a clear opening width of up to 5.5 m
| Set CAIS-FOLLOW-ME-SM contains: | ||||
|---|---|---|---|---|
|
2 × | Trolley with 14 bearing rollers | CAIS-SPEED-M-MAX14 | |
|
Galvanized steel trolley with 14 metal wheels. |
Details 
|
|||
|
2 × | Trolley with eight bearing rollers | CAIS-FOLLOW-V | |
|
Galvanized steel trolley with 8 metal wheels and a modified base for mounting to a C-profile. This prepared mounting method ensures that both gates in the telescopic system are at the same height. |
Details
|
|||
|
5,2+5,2 m | C-profile 95x86x5mm with screw holes, Zn, STAGE MZ 420 STRONG | CAIS-STAGE-MZ-S420-6 | |
|
CAIS STAGE MZ 6 guide C-profile, suitable for cantilever sliding gates as well as hanging gates. The C-profile measures 95x86x5mm and is made of S420-grade galvanized steel.
|
Details
|
|||
|
1 × | Lower guide ramp – for C-profile 95x86x5 | CAIS-RUN-M | |
|
The bottom guide ramp for a sliding gate slides into the C-profile and is secured to it with a clamping plate. The ramp engages with the bottom stop to take the weight off the gate when it is closed. |
Details
|
|||
|
1 × | Lower end stop for C-profile 95x86x5 | CAIS-LAST-M | |
|
Run-off pocket mounted at the bottom of the gate stop post. Relieves the compressive and tensile forces acting on the roller carriages when the gate is closed. |
Details
|
|||
|
1 × | 95x86x5 C-profile cap | CAIS-PILOT-MN | |
|
The end cap for a sliding gate C-profile is fitted at the start and, if required, at the end of the guide C-profile. It slides into the C-profile and is secured to it with a clamping plate. |
Details
|
|||
|
2 × | Stop holder | CAIS-PARK240 | |
|
Bracket suitable for mounting a gate end stop. |
Details
|
|||
|
1 × | Top guide with end stop | CAIS-PADDOCK4 | |
|
Gate top stop with guide rollers. |
Details
|
|||
|
2 × | Side gate guide, 40mm | CAIS-JBM40 | |
|
Gate side guide |
Details
|
|||
|
2 × | Guide roller, 40x55 | CAIS-RCB40 | |
|
Guide roller |
Details
|
|||
|
5,2+5,2 m | U-shaped guide profile | CAIS-DRIVER-48 | |
|
It is used to guide the sliding gate. |
Details
|
|||
|
1 × | Telescopic mechanism kit | CAIS-TELESKOP | |
|
The set includes components for a telescopic gate |
Details
|
|||
Set of screws and rivet nuts for mounting
Using the telescopic mechanism
This solution is used in locations, where there is not enough space to open a standard cantilever gate. The opening is notionally divided into two sections, and each of the two gate panels covers approximately half of the clear opening. When open, the gate needs 36% less space than a standard cantilever gate.
Complete means that the package contains everything: bottom guide C-profiles, carriages, top guide, cables and a carefully designed guide mechanism that transfers force from one gate panel to the other (see the full package contents). All you need to do is build two frames and bolt or weld them to the C-profiles.
The carriages are designedso they can be anchored directly, without any additional work, to the concrete foundation (the first pair of carriages) and to the gate frame (the second pair of carriages). As a result, the bottom edges of both gate panels align at the same height, with no need to adjust the carriages. If you build the two frames, you can complete the installation on site without welding, using only basic tools (drill, socket set, etc.).
Cable mechanism transfers force from one gate panel to the other, whether the force comes from the operator or from manual opening. This means both gate panels move simultaneously.
Key benefits of the Follow me SM telescopic system
- Space saving – compared with a standard cantilever gate, you can save up to 36% of the space required to install the gate.
- Speed – the gate opens and closes twice as fast as a standard cantilever gate.
- Super-easy installation – the kit is ready for easy installation without welding. Every component has been carefully designed down to the last detail.
- Durability and functionality – all components are galvanized and tested.
- Adjustability – the second gate panel can be adjusted in three directions as needed.
With a standard sliding gate, the entire gate length must slide back to open it. If you have a wide clear opening but not enough space for the gate to slide into, a telescopic mechanism is the right solution. This mechanism splits your clear opening between two overlapping panels that slide alongside each other. This lets you save up to 36% of the space required to install the gate.
Compared with a standard gate installation, the telescopic system offers up to twice the speed. A telescopic gate consists of two sections: the first is driven by the sliding gate operator, while the second is pulled by a cable system. As the rear section opens, the cable system pulls the front section twice as fast as the rear one.
Installing the telescopic kit is as straightforward as possible. The components are precisely designed to perform their intended functions. There is no need to figure anything out on site. The C-profile has pre-drilled anchoring holes, and the package also includes screws for attaching the gate frame.
The kit is made from high-quality German steel, and all components are galvanized. It was tested for 32,000 cycles without failure at temperatures from –37°C to +50°C.
The kit allows the second (front) gate section to be adjusted in three directions, helping you achieve smooth gate operation and minimize mechanical resistance.
Telescopic gate operator
A telescopic gate can be automated using a standard sliding gate operator. The rack is installed on only one gate panel; the second panel (which receives force from the first) moves twice as fast as the first panel. A telescopic gate therefore opens faster than a standard cantilever gate. Standard 24 V sliding gate operators (e.g. NICE Robus) have adjustable speed, so you can set the gate's travel speed to suit your needs.
Technical information
Telescopic kit for clear openings: up to 5.5 m
Combined weight of both gate frames: max. 450 kg
Material: hot-dip galvanized and electro-galvanized steel
Operating temperature: –37 °C to 50 °C
How can I order this item?
Choose the option that suits you:
- order online: use the buy button to add the goods to your shopping cart (you will find the buy button here in the product variants table).
- order by email: place your order at [email protected]
