Kit for building a self-supporting stainless steel sliding gate up to 4.5 m, INOX 68x68x3

INOX


Product availability: In stock

We normally dispatch goods within 24 hours.

Kit for building a self-supporting stainless steel sliding gate up to 4.5 m, INOX 68x68x3 Kit for building a self-supporting stainless steel sliding gate up to 4.5 m, INOX 68x68x3
SADA-28
In stock
€1,291.25 excluding VAT
€1,588.24 including VAT

 pcs
C-channel dimensions Weight
68x68x3 43 kg

Description of Kit for building a self-supporting stainless steel sliding gate up to 4.5 m, INOX 68x68x3

All components in the set are made of stainless steel.

Note: The set is more cost-effective than purchasing the components individually . On request, we can adjust the contents of the set and deduct an appropriate discount. If you have a specific request or would like some advice, contact us.

The set includes: SADA-28
Stainless steel trolley with five bearing rollers for a cantilever sliding gate 2 × Stainless steel trolley with five bearing rollers C395IX-1P

Trolley made of stainless steel with five stainless steel bearing rollers.

 Detail
Stainless steel C-profile for a sliding gate 6 m Stainless steel C-profile CP-INOX-68

A stainless steel C-shaped guide profile welded to the underside of the gate, allowing it to travel along trolleys anchored in a concrete foundation.

 Detail
Stainless steel bottom catcher 1 × Stainless steel bottom catcher SN-1-68-INOX

The pickup wheel is fitted to the start of the C-profile and rolls into the bottom stop mounted on the gate post, relieving the gate when closed.

 Detail
Stainless steel bottom stop 1 × Stainless steel bottom stop DK-1-68-INOX

A receiving pocket mounted at the bottom of the gate post. It relieves the pushing and pulling forces acting on the trolleys when the gate is closed.

 Detail

 

Top guide Use this if your gate infill (e.g. wooden slats, polycarbonate, or expanded metal) does not extend above the gate. You can anchor it to an existing fence or to a post.

Side guide Use this if you want the gate infill to extend above the gate frame. Anchor the rollers to the post on the inside of the gate.

The top and side guides cost the same.


You can choose nylon or metal. Nylon rollers support heavy gate loads, prevent wear on the C-profile, and ensure quiet gate operation. Nylon and metal rollers cost the same.

How can I order this item?

Choose the option that suits you:

  1. order online: use the buy button to add the goods to your shopping cart (you will find the buy button here in the product variants table).
  2. order by email: place your order at [email protected]

Ask us anything about Kit for building a self-supporting stainless steel sliding gate up to 4.5 m, INOX 68x68x3

Product: Kit for building a self-supporting stainless steel sliding gate up to 4.5 m, INOX 68x68x3
Name:
Email:
Phone:
Message:
This page is protected by Google reCAPTCHA.
Print page Print page