Kit for building a cantilever sliding gate up to 4.5 m, INOX/ZN/KOV 68x68x3

INOX Zn


Product availability: Within 3 weeks

We normally dispatch the goods within 3 weeks

Kit for building a cantilever sliding gate up to 4.5 m, INOX/ZN/KOV 68x68x3 Kit for building a cantilever sliding gate up to 4.5 m, INOX/ZN/KOV 68x68x3
SADA-29-K
Within 3 weeks
€481.40 excluding VAT
€592.13 including VAT

 pcs
Weight
58 kg

Description of Kit for building a cantilever sliding gate up to 4.5 m, INOX/ZN/KOV 68x68x3

All components except the C-profile are made of galvanized steel. The C-profile is made of stainless steel (INOX).

Note: The KIT is more cost-effective than purchasing the components individually . If you wish, we can adjust the contents of the KIT and deduct an appropriate discount. If you have a specific request or would like some advice, contact us.

Set SADA-29-K contains:
Trolley with five bearing rollers, metal 2 × Trolley with five bearing rollers, metal V-02-8-K

Trolley made of galvanized steel with five metal bearing rollers.

 Details
Stainless steel C-profile 68x68x3, 6 m 1 × Stainless steel C-profile 68x68x3, 6 m CP-INOX-68-6

Stainless steel C-channel guide profile welded to the bottom of the gate, allowing it to run on carriages anchored in the concrete foundation.

 Details
Galvanized lower guide 1 × Galvanized lower guide SN-1-68

The guide roller is mounted at the beginning of the C-profile and rolls into the lower stop fitted to the closing post, relieving the gate when it is closed.

 Details
Bottom stop made of galvanized steel for 68x68 profile 1 × Bottom stop made of galvanized steel for 68x68 profile DK-1-68

Run-off pocket mounted at the bottom of the gate stop post. Relieves the compressive and tensile forces acting on the roller carriages when the gate is closed.

 Details
Metal C-channel cap 1 × Metal C-channel cap SK-1-68

The end cap for the sliding gate C-profile is installed at the beginning and, if required, at the end of the guide C-profile. It slides into the C-profile and is secured to it using a clamping plate.

 Details

How can I order this item?

Choose the option that suits you:

  1. order online: use the buy button to add the goods to your shopping cart (you will find the buy button here in the product variants table).
  2. order by email: place your order at [email protected]

Ask us anything about Kit for building a cantilever sliding gate up to 4.5 m, INOX/ZN/KOV 68x68x3

Product: Kit for building a cantilever sliding gate up to 4.5 m, INOX/ZN/KOV 68x68x3
Name:
Email:
Phone:
Message:
This page is protected by Google reCAPTCHA.
Print page Print page