Kit for building a cantilever sliding gate up to 4.5 m, INOX/ZN 68x68x3

INOX Zn


Product availability: In stock

We normally dispatch goods within 24 hours.

Kit for building a cantilever sliding gate up to 4.5 m, INOX/ZN 68x68x3 Kit for building a cantilever sliding gate up to 4.5 m, INOX/ZN 68x68x3
SADA-29
in stock
€489.33 excluding VAT
€601.88 including VAT

 pcs
C-channel dimensions Weight
68×68×3 35 kg

Description of Kit for building a cantilever sliding gate up to 4.5 m, INOX/ZN 68x68x3

All components except the C-profile are made of galvanized steel. The C-profile is made of INOX (stainless steel).

Note: The SET is compared with individual components offered at a discounted price. If you wish, we can adjust the contents of the SET and deduct an appropriate discount. If you have a specific request or would like some advice, contact us.

Set SADA-29 contains:
Trolley with five bearing rollers 2 × Trolley with five bearing rollers V-02-8

Trolley made of galvanized steel with five nylon rollers fitted with bearings.

 Details
Stainless steel C-profile 68x68x3, 6 m 1 × Stainless steel C-profile 68x68x3, 6 m CP-INOX-68-6

Stainless steel C-channel guide profile welded to the bottom of the gate, allowing it to run on carriages anchored in the concrete foundation.

 Details
Galvanized lower guide 1 × Galvanized lower guide SN-1-68

The guide roller is mounted at the beginning of the C-profile and rolls into the lower stop fitted to the closing post, relieving the gate when it is closed.

 Details
Galvanized steel bottom stop 1 × Galvanized steel bottom stop DK-1-80

Run-off pocket mounted at the bottom of the gate stop post. Relieves the compressive and tensile forces acting on the roller carriages when the gate is closed.

 Details
Metal C-channel cap 1 × Metal C-channel cap SK-1-68

The end cap for the sliding gate C-profile is installed at the beginning and, if required, at the end of the guide C-profile. It slides into the C-profile and is secured to it using a clamping plate.

 Details

 

Top guide Use this if the infill of your gate (e.g. wooden slats, Lexan, expanded metal) does not extend above the gate. Mount it to an existing fence or a post.

Side guide Use this if you want the gate infill to extend above the gate frame. Mount the rollers to the post on the inside of the gate.

The top guide and side guide cost the same.


You can choose nylon or metal. Nylon rollers can support a heavy gate load, prevent wear on the C-profile, and ensure quiet gate operation. Nylon and metal rollers cost the same.

How can I order this item?

Choose the option that suits you:

  1. order online: use the buy button to add the goods to your shopping cart (you will find the buy button here in the product variants table).
  2. order by email: place your order at [email protected]

Ask us anything about Kit for building a cantilever sliding gate up to 4.5 m, INOX/ZN 68x68x3

Product: Kit for building a cantilever sliding gate up to 4.5 m, INOX/ZN 68x68x3
Name:
Email:
Phone:
Message:
This page is protected by Google reCAPTCHA.
Print page Print page