KEY Sub SUB-44WR – four-channel remote control for KEY operators with rolling code, waterproof
| Product availability: | In stock | We normally dispatch goods within 24 hours. |
|---|
in stock
€28.56 including VAT
| Weight |
|---|
| 50,00 g |
Description of KEY Sub SUB-44WR – four-channel remote control for KEY operators with rolling code, waterproof
Four-channel remote control from the (i.e. four-button) remote control from the Sub compatible with all KEY drives using the rolling code type ROLLING and LED transmission indicator. With this remote control, you can operate four KEY devices, or use the receiver KEY RXM23 to operate a device from another brand as well.
Note: the LED on the KEY Sub SUB-44WR lights up blue, indicating that the remote control supports the ROLLING code. If your remote control lights up red, it is the remote control KEY Sub SUB-44, which supports fixed codes. Alternatively, if the LED lights up green, it is a copying remote control KEY Sub SUB-44N.
What's included KEY Sub SUB-44WR
- waterproof remote control
- CR2032 lithium battery (replacement)
- remote control manual KEY Sub SUB-44WR
Technical specifications of the remote control KEY Sub SUB-44WR
| Frequency: | 433.92 MHz |
|---|---|
| Number of channels: | 4 buttons, |
| Power supply: | 3V DC; CR2032 lithium battery |
| Remote control range: |
approx. 100 m outdoors |
| Signal coding: | ROLLING |
| Current consumption: | 8mA |
| Operating temperature: | -10°C to 55°C |
| Ingress protection rating: | IP67 |
| Dimensions: | 72×42×11 mm (W×D×H) |
| Weight: | 36g |
How to pair the remote control KEY Sub SUB-44WR with a KEY
Refer to the manual for the receiver you want to pair the remote control with. To pair the remote control with an external KEY RXM23 receiver see instructions for adding a remote control to and deleting it from the receiver's memory.
Remote control photo gallery KEY Sub SUB-44WR
KEY SUB-44R remote controls can be supplied on request with coloured covers in various colours, or you can order replacement covers separately right here.
| Colour options for KEY Sub remote controls | The remote controls have replaceable covers |
|---|---|
 |
 |
Replacing the battery in the remote control KEY Sub SUB-44WR
| 1. Unscrew the screw on the back | 2. Lift the bottom of the cover by approximately 0.5 mm |
|---|---|
 |
 |
| 3. Gently push the cover upwards | 4. Do not press on the top part of the cover |
 |
 |
| 5. Separate the cover halves | 6. Replace the battery on the circuit board |
 |
 |
| 7. Position the bottom part of the cover and join the two halves together | 8. Do not start joining the halves at the top; start at the bottom |
 |
 |
| 9. Snap the top parts of the covers together | 10. Screw the screw back into the rear |
 |
 |
The four-channel remote control is designated by the manufacturer as 900SUB-44WR, 900KSUB44WR or 900SUB44WR.
How can I order this item?
Choose the option that suits you:
- order online: use the buy button to add the goods to your shopping cart (you will find the buy button here in the product variants table).
- order by email: place your order at [email protected]
