INOX toothed rack, 30x8mm, stainless steel, M4, 1 m segment
INOX| Product availability: | In stock | We normally dispatch goods within 24 hours. |
|---|
in stock
€54.57 including VAT
| Weight |
|---|
| 1,88 kg |
Description of INOX toothed rack, 30x8mm, stainless steel, M4, 1 m segment
Stainless steel toothed rack – stainless steel. Each segment is 1 m long, 8 mm thick, with a tooth height of 30 mm.
The toothed rack is supplied with 3 weld-on nuts for mounting and 3 fixing screws. The nuts are primarily intended to be welded to the gate. The segments are compatible with one another and can be easily joined. There are 3 mounting points per 1 m of rack.
The gear module is 4 and it is compatible with drives Nice in our range, as well as most drives from other brands.
Toothed rack is made from high-quality stainless steel. This rack is mainly intended for heavy gates (max. 1900 kg, recommended. 1200 kg) with a high number of cycles per day.
How many metres of rack do I need for my gate?
For your gate, you will probably need a toothed rack with a length equal to the clear opening width plus 1 m (or enough to extend slightly beyond the drive's fixed sprocket when the gate is closed). Example: My gate opening is 3.00 m wide, and the drive sprocket's axis is 30 cm from the start of the opening.
You will need approximately 3.50 m of toothed rack (Based on our experience, we recommend ordering 4.00 m to make sure you have enough).
|
General information:
The operating principle is based on what is known as a rack-and-pinion drive, where the toothed rack screwed firmly to the gate is moved by the sprocket of a fixed electromechanical gate drive. |
 Rack-and-pinion drive for a gate |
How can I order this item?
Choose the option that suits you:
- order online: use the buy button to add the goods to your shopping cart (you will find the buy button here in the product variants table).
- order by email: place your order at [email protected]
