Guide ramp for C-profile 68x68x3 for cantilever sliding gates
Zn| Product availability: | In stock | We normally dispatch goods within 24 hours. |
|---|
Description of Guide ramp for C-profile 68x68x3 for cantilever sliding gates
Bottom guide ramp for sliding gate is installed at the beginning, and optionally also at the end of the supporting C-profile. It slides into the C-profile and is secured to it with a clamping plate tightened using two screws. When closing sliding gate, the gate therefore does not hit the bottom stop (e.g. run-in pocket) with its body, but against the stop bottom guide ramp. In practice, when the guide roller contacts the bent-down section of the run-in pocket guides the gate into the correct height position, and when the gate is closed, it “rests” in this run-in pocket.
Dimensions of the guide ramp backplate and screws
| Code | Backplate | Screws |
|---|---|---|
| SN-68 | 50x46mm, thickness 5mm | M8 |
Example of installing a guide ramp in a C-profile
How can I order this item?
Choose the option that suits you:
- order online: use the buy button to add the goods to your shopping cart (you will find the buy button here in the product variants table).
- order by email: place your order at [email protected]
