Drive kit for sliding gates up to 400 kg, Comunello FORT400 (D)
| Product availability: | In stock | We normally dispatch goods within 24 hours. |
|---|
in stock
€401.96 including VAT
| Weight |
|---|
| 9,00 kg |
Description of Drive kit for sliding gates up to 400 kg, Comunello FORT400 (D)
Comunello FORT400 drive is designed for sliding gates with a weight of up to 400 kg. The drive has an electromechanical stop switch. The drive is non-reversible. Detailed technical specifications ». Download the manual ».
| Set CML-FORT400HP-D contains: | ||||
|---|---|---|---|---|
|
1 × | Comunello FORT400 drive | CML-FORT400HP-A | |
|
Comunello FORT400 electromechanical gate operator for sliding gates with a total weight of up to 400 kg.
|
Details 
|
|||
|
1 × | Comunello CU-24V-HP control unit | CML-CU-24V-HP | |
|
Control unit for 1 or 2 Comunello drives. Includes a built-in radio receiver for remote controls. |
Details
|
|||
|
1 × | Comunello VICTOR2RC remote control, grey | CML-VICTOR2R | |
|
Comunello two-channel remote control compatible with all Comunello drives. With this remote control, you can operate two Comunello devices or send two different commands to one device. |
Details
|
|||
|
1 × | Pair of Comunello DART photocells | CML-DART | |
|
Safety photocells are installed on either side of the opening. They create an infrared beam that, when interrupted by a car or pedestrian, for example, sends a signal to the drive to stop the gate or prevent it from opening. |
Details
|
|||
|
1 × | Comunello SWIFT LED beacon with antenna | CML-SWIFT | |
|
The Comunello Swift warning light is made of impact-resistant polycarbonate and has a built-in antenna to extend the remote control’s range. |
Details
|
|||
|
1 × | Installation manual for Comunello FORT operators |
Download
|
|
|
Installation manual with illustrated wiring diagrams and instructions for programming and pairing remote controls. |
||||
|
|
1 × | Installation Manual for the CU-24V-HP Control Unit |
Download
|
|
|
Installation manual with illustrated wiring diagrams and instructions for programming and pairing remote controls. |
||||
2 pcs. release keys
End stops
Technical specifications:
| Power supply: | 230 VAC 50 Hz |
|---|---|
| Motor version: | 24 VDC |
| Power consumption: | 70 W |
| Load: | 3,0 A |
| Force: | 350 N |
| Duty cycle: | intensive |
| Protection rating: | IP44 |
| Operating temperature: | -20°C / +50°C |
| Rack | M4 |
| Opening speed: | 0,26 m/s |
How can I order this item?
Choose the option that suits you:
- order online: use the buy button to add the goods to your shopping cart (you will find the buy button here in the product variants table).
- order by email: place your order at [email protected]
