DIY sliding gate installation - Ivanka pri Dunaji1
Components used (for both gates):
CP-80 (8m) C-profile 80x80x5 mm, Fe
V-02-1 (4x) Adjustable swinging trolley, 5 rollers with mounting plate
DK-1-90 (2x) Receiving cup – bottom stop
SN-1-80 (2x) Bottom guide ramp
VVR-3-G (2x) Top guide with two adjustable rollers
JOKL-60x40x2 (16m) Square hollow section 60x40x2
SH-02-2 + end cap Bare Fe post for direct concreting, 80x80x3mm
JOKL-80x80x3 (3m) Square hollow section 80x80x3
ZC-19 (2x) Square end cap
UB-1-40G (2x) Top gate stop with rollers
ZH-05 (2x) Hook lock for sliding gates E
