Wireless keypad for LiftMaster 9747E garage doors
| Product availability: | within 3 days | We usually ship the goods within 3 days. |
|---|
within 3 days
€95.68 including VAT
| Weight |
|---|
| 0,24 kg |
Description of Wireless keypad for LiftMaster 9747E garage doors
Wireless keypad LiftMaster 9747E for remote control of LiftMaster garage doors and gates 433,92 MHz with rolling code. This model provides simple and reliable operation without advanced myQ smart features. For a command entered on the keypad to be carried out, the correct four-digit security code. The keypad is suitable for indoor and outdoor use. Power is supplied by a 9 V battery. It is compatible with any LiftMaster garage door opener operating at 433 MHz.
It works on the same principle as a remote control, so it can be placed anywhere within the signal reception range of the opener.
Technical specifications
| Frequency | 433,92 MHz |
|---|---|
| Code type | rolling (rolling code) |
| Weight | 240 g |
| Dimensions L x H x W | 100 x 40 x 70 mm |
| Modulation | AM |
| Control of multiple doors | yes |
| myQ/smartphone | no |
| Battery | 9 V |
| Backlit buttons | yes |
| Location | indoor and outdoor |
Use
The LiftMaster 9747E wireless keypad uses a four-digit code. We recommend programming your code before installation and testing signal reception in advance at the planned installation location. Move the keypad if necessary. You can change your personal code as needed. You can choose from up to 10,000 different combinations.
If you are expecting guests or have visitors on site (for example, installers, builders or a courier), you can add a temporary code. This code can be limited to a certain number of hours or uses. The keypad uses a secure rolling code.
This wireless control is designed for LiftMaster garage door openers, but it can also be paired with a multifunction door control.
Operation
The opener is activated by entering the four-digit code and pressing ENTER. If you accidentally press the wrong numbers, you can correct them immediately. The ENTER button sends only the last four digits entered. The keypad will flash for 15 seconds after the code is entered. During this time, you can use the ENTER button to stop the door or change its direction of travel.
Programming the keypad into the receiver's memory
1. Press and release the yellow Learn button on the opener. The Learn indicator stays lit continuously for 30 seconds.
2. Within 30 seconds, enter a four-digit code (PIN) of your choice on the keypad and hold down ENTER.
3. Release the button when the light on the motor unit starts flashing. The code has been programmed. If no light bulbs are installed, you will hear two clicks.
How can I order this item?
Choose the option that suits you:
- order online: use the buy button to add the goods to your shopping cart (you will find the buy button here in the product variants table).
- order by email: place your order at [email protected]
