PILWOOD SAND Wood-Plastic Fence Board 98x12mm, Brown
| Product availability: | In stock | We normally dispatch goods within 24 hours. |
|---|
in stock
€8.49 including VAT
| Dimension [mm] |
Length [m] | Weight |
|---|---|---|
| 98x12 | 1,5 m | 2,25 kg |
in stock
€11.32 including VAT
| Dimension [mm] |
Length [m] | Weight |
|---|---|---|
| 98x12 | 2 m | 3,00 kg |
Description of PILWOOD SAND Wood-Plastic Fence Board 98x12mm, Brown
PILWOOD® fence boards Sand with a wood-grain texture are made from WPC (wood-plastic composite), which combines wood, high-quality, non-toxic HDPE polymer, reinforcing filler with pigment, additives, antioxidants, and lubricant. This material is one of the most durable, long-lasting, maintenance-free solutions.
Pilwood fence boards are a suitable choice thanks to their high strength and long service life without the need for protective coatings.
This is one of the most durable, long-lasting, maintenance-free materials for your fence.
Fence board composition:
30% HDPE, 50% wood shavings, 15% pigment, 5% antioxidants and lubricant.
The colour shade may vary between production batches of fence boards because they contain natural ingredients.
Pilwood Fence Board Installation Guide
Vertical installation of fence boards
Support profiles
- You can choose the longitudinal support profiles to suit your requirements
- the recommended maximum overhang beyond the support profile at both the top and bottom is 150mm
- the recommended maximum spacing between support profiles is 780mm
- two support profiles are sufficient for fence boards up to 1.2m long; three support profiles are recommended for longer boards
- the support profiles are easily fastened to the post using a small L-shaped clip
Fastening the fence board
- fasten the fence board to the support profile using a 4.8x25mm rivet
- pre-drill the hole in both the fence board and the profile using a 5mm drill bit
- if using two rivets, keep them at least this far from the edge of the fence board: 16mm
Fence board fastening options
- leave a gap of at least 5mm between fence boards to allow for thermal expansion
Option A 
Option B 
Horizontal installation of fence boards
Support profiles
- the maximum length of a fence board for horizontal installation should not exceed 1.5m.
- if using a 2m fence board, it must be reinforced at the centre with a support, such as a profile.
- the fence boards themselves are fastened to the post using a large L-shaped clip
Fastening the fence board
- fasten the fence board to the L-shaped clip using an M6x20 carriage bolt
- pre-drill the hole in the fence board using a 6mm drill bit
- if using two bolts, keep them at least this far from the edge of the fence board: 16mm
Fence board fastening options
- leave a gap of at least 5mm between fence boards to allow for thermal expansion
How can I order this item?
Choose the option that suits you:
- order online: use the buy button to add the goods to your shopping cart (you will find the buy button here in the product variants table).
- order by email: place your order at [email protected]
