License plate recognition camera


Product availability: In stock

We normally dispatch goods within 24 hours.


License plate recognition camera
AXIS-T1455-LE3
In stock
€2,337.66 excluding VAT
€2,875.32 including VAT

 pcs
Weight
1,00 kg

Description of License plate recognition camera

Open the gate or raise the barrier only for vehicles with an authorised registration number (number plate). As a vehicle approaches the gate or barrier, a high-resolution camera recognises its registration number, then compares it with the database and issues a command accordingly.

Install the high-resolution outdoor camera by the entrance. Use the swivel joint to point it towards approaching vehicles, connect it to a router or computer via an Ethernet cable, and to the device you want to control via a two-core cable (gate operator, barrier, etc.). Use the software to add vehicle registration numbers to the database (and add or delete them at any time). The gate or barrier will open automatically when a vehicle with a listed number arrives. Other vehicles will not be allowed in. 

Number plate recognition system is particularly suitable for sites with a large number of vehicles (apartment buildings, companies, rental properties), but also sites with a smaller number of vehicles that change frequently (hotels, guesthouses). Of course, there's nothing stopping you from installing the camera at home for a single car :)

The camera is suitable for reading number plates in slow-moving traffic. The camera can read number plates at speeds of up to 30km/h. It is designed for outdoor use. It has a memory card slot, so in theory it can also operate without a router or computer connection (the list of number plates is stored on the card). The camera is supplied with a software application that uses the camera's own processing power. This means you don't need a server, and data transfer is reduced to just a few kB.

The camera is powered via PoE (Power over Ethernet), which means you connect the PoE adapter to a power supply, then connect a "non-powered" Ethernet cable at one end to a computer, which is used for communication only, or to a router, and connect a "powered" Ethernet cable at the other end to the camera, which carries communications from the router or computer, along with power for the camera.

How it works
In principle, the camera is just an image sensor. It sends the captured image to its built-in software, which uses image recognition technology to extract a string of characters—the vehicle registration number—from it and simply generates a "number plate read" event. In the software settings, you can configure what should happen next, i.e. you can choose to do nothing and simply log the vehicle's visit, or set up other responses to the event, such as checking the database to confirm that the registration number is authorised for entry, then activating the relay output.. Connect this relay output to the gate operator or barrier at the same input used for a wired push button, video intercom, external receiver, GSM module, etc. Every gate operator has this input.

The camera is sold as a KIT: Camera + PoE adapter + ERM1 relay

Technical specifications:

Camera   Network   
Image sensor  CMOS PoE Class 3
Sensor size  1/2.8  Security  
Wide dynamic range  Forensic WDR Secure firmware  yes
Minimum light sensitivity  0.07 lux Secure boot   yes
Minimum illumination  0.01 lux  General  
VIDEO   Remote focus  yes
Maximum video resolution  1920x1080 Remote zoom   yes 
Maximum frames per second  50/60 Built-in night vision  yes
Electronic stabilisation  - Memory card slot  yes 
Lens   Operating temperature  -40 to 60 °C
Focal length  10.9 - 29 mm Suitable for outdoor use  yes
Optical zoom   3x Impact protection  IK10
Horizontal field of view  30-11 ° IP rating  IP66, IP67
Vertical field of view  17-6.5 ° Camera can be repainted   yes
 Data compression   Sustainability   BFR/CFR free, PVC free
Zipstream  yes  Power consumption  
H.264  Baseline, High, Main  Max. (W)  13
H.265  yes  Average (W)  7.8
Motion JPEG  yes    
Audio support  yes    

Photos of the actual installation:

Installed camera
Installed camera Installed camera

How can I order this item?

Choose the option that suits you:

  1. order online: use the buy button to add the goods to your shopping cart (you will find the buy button here in the product variants table).
  2. order by email: place your order at [email protected]

Ask us anything about License plate recognition camera

Product: License plate recognition camera
Name:
Email:
Phone:
Message:
This page is protected by Google reCAPTCHA.