Combined aluminium kit for building a cantilever sliding gate up to 4 m
| Product availability: | within 3 days | We usually ship the goods within 3 days. |
|---|
within 3 days
€660.91 including VAT
| Weight |
|---|
| 40 kg |
Description of Combined aluminium kit for building a cantilever sliding gate up to 4 m
Aluminium sliding gate kit for a clear opening width of 4 m.
If you have a specific request or would like some advice, contact us.
| The kit includes: | SADA-42 | ||
|---|---|---|---|
 |
2 × | Adjustable swing carriage, 5 rollers | - |
|
Galvanized support carriage with nylon rollers. The nylon rollers allow the gate to support heavy loads, prevent wear on the C-profile and ensure quiet operation. |
|||
 |
1 × 6 m | Aluminium C-profile, 90x95 mm, AL | CP-AL-90x95 |
|
A heavy-wall C-shaped aluminium guide profile welded to the underside of the gate, allowing it to run on carriages anchored in a concrete foundation. |
Detail  |
||
 |
1 × | Lower guide ramp | - |
|
The guide wheel is fitted at the beginning of the C-profile and runs into the lower catch mounted on the closing post, relieving the gate when it is closed. |
|||
 |
1 × | Lower gate stop pocket | - |
|
The gate stop pocket is mounted at the bottom of the closing post. It relieves the compressive and tensile forces acting on the carriages when the gate is closed. |
|||
 |
2 × | C-profile end cap | - |
|
The end cap for the sliding gate C-profile is fitted at the beginning and, if required, at the end of the guide profile. It slides onto the C-profile and is secured with screws. |
|||
Profile dimensions:
Ways to anchor the gate to the C-profile:
How can I order this item?
Choose the option that suits you:
- order online: use the buy button to add the goods to your shopping cart (you will find the buy button here in the product variants table).
- order by email: place your order at [email protected]
