CAIS Self-supporting kit 95x86x5 for a sliding gate with a passage width of 8 m, perforated Fe profile
| Product availability: | In stock | We normally dispatch goods within 24 hours. |
|---|
in stock
€1,114.34 including VAT
| Weight |
|---|
| 155 kg |
Description of CAIS Self-supporting kit 95x86x5 for a sliding gate with a passage width of 8 m, perforated Fe profile
CAIS component set for building a cantilever sliding gate with a passage width of up to 8m/700kg. All components except the C-profile are galvanized.
| Set CAIS-DEMO-MBE-33 contains: | ||||
|---|---|---|---|---|
|
2 × | C-profile 95x86x5mm with holes for bolting, Fe, 6m | CAIS-STAGE-MB-6 | |
|
A C-channel bolted to the bottom of the gate, which allows the gate to run on carriages anchored in a concrete foundation. Unfinished, raw steel.
|
Details 
|
|||
|
2 × | Trolley with 8 bearing rollers | CAIS-SPEED-ME | |
|
Galvanized steel trolley with 8 metal wheels. |
Details
|
|||
|
1 × | Lower guide ramp – for C-profile 95x86x5 | CAIS-RUN-M | |
|
The bottom guide ramp for a sliding gate slides into the C-profile and is secured to it with a clamping plate. The ramp engages with the bottom stop to take the weight off the gate when it is closed. |
Details
|
|||
|
1 × | Lower end stop for C-profile 95x86x5 | CAIS-LAST-M | |
|
Run-off pocket mounted at the bottom of the gate stop post. Relieves the compressive and tensile forces acting on the roller carriages when the gate is closed. |
Details
|
|||
|
1 × | 95x86x5 C-profile cap | CAIS-PILOT-MN | |
|
The end cap for a sliding gate C-profile is fitted at the start and, if required, at the end of the guide C-profile. It slides into the C-profile and is secured to it with a clamping plate. |
Details
|
|||
|
1 × | C-profile cover 95x86x5 with mounting to the guide rail | CAIS-PILOT-MR | |
|
The CAIS PILOT MR end cap for the sliding gate C-profile is installed at the beginning of the guide C-profile. The end cap is attached to the CAIS RUN M gate stop. |
Details
|
|||
|
1 × | Top guide with two rollers for sliding gates | CAIS-FRM2 | |
|
Gate guide for vertical stabilization of the gate in the transverse direction. |
Details
|
|||
Set of screws and rivet nuts for mounting
KIT BENEFITS AND FEATURES CAIS
- Easy assembly thanks to well-thought-out details, and quick installation by bolting the C-profile to the structure, eliminating the need to weld the C-profile.
- Mounting screws and rivet nuts are included for attaching the C-profile to the structure through the holes in the C-profile, spaced at least 400mm apart.
- The untreated, uncoated steel C-profile, with a serial number and tested 100% with the trolleys, is as precise as they come.
- High-quality trolley bearings. Trolley wheel centers are drilled, not laser-cut.
- Tested from -37°C to +50°C
- German steel. Japanese robots. Made in the Czech Republic.
EXAMPLE OF THE KIT'S SUITABILITY FOR BUILDING A CANTILEVER SLIDING GATE
The kit is suitable for a passage width of up to 8m and a total gate weight of 700 kg. The following drawing shows dimensions for example passage widths, along with recommended structural profiles. The table below shows the dimensions for each passage width of a cantilever sliding gate.
CROSS-SECTION OF THE GATE WITH TROLLEYS AND GUIDE
How can I order this item?
Choose the option that suits you:
- order online: use the buy button to add the goods to your shopping cart (you will find the buy button here in the product variants table).
- order by email: place your order at [email protected]
