CAIS Cantilever Sliding Gate Kit 95x86x5 for a 4.5 m Clear Opening, Perforated Fe Profile KIT DEMO MBE 03
| Product availability: | In stock | We normally dispatch goods within 24 hours. |
|---|
In stock
€750.01 including VAT
| Weight |
|---|
| 89 kg |
Description of CAIS Cantilever Sliding Gate Kit 95x86x5 for a 4.5 m Clear Opening, Perforated Fe Profile KIT DEMO MBE 03
Component set KIT DEMO MBE 03 for building a self-supporting sliding gate with a passage width of up to 4.5 m/525kg. All components except the C-profile are galvanized.
| Set CAIS-DEMO-MBE-03 contains: | ||||
|---|---|---|---|---|
|
1 × | C-profile 95x86x5mm with holes for bolting, Fe, 6m | CAIS-STAGE-MB-6 | |
|
A C-channel bolted to the bottom of the gate, which allows the gate to run on carriages anchored in a concrete foundation. Unfinished, raw steel.
|
Details 
|
|||
|
2 × | Trolley with 8 bearing rollers | CAIS-SPEED-ME | |
|
Galvanized steel trolley with 8 metal wheels. |
Details
|
|||
|
1 × | Lower guide ramp – for C-profile 95x86x5 | CAIS-RUN-M | |
|
The bottom guide ramp for a sliding gate slides into the C-profile and is secured to it with a clamping plate. The ramp engages with the bottom stop to take the weight off the gate when it is closed. |
Details
|
|||
|
1 × | Lower end stop for C-profile 95x86x5 | CAIS-LAST-M | |
|
Run-off pocket mounted at the bottom of the gate stop post. Relieves the compressive and tensile forces acting on the roller carriages when the gate is closed. |
Details
|
|||
|
1 × | 95x86x5 C-profile cap | CAIS-PILOT-MN | |
|
The end cap for a sliding gate C-profile is fitted at the start and, if required, at the end of the guide C-profile. It slides into the C-profile and is secured to it with a clamping plate. |
Details
|
|||
|
1 × | C-profile cover 95x86x5 with mounting to the guide rail | CAIS-PILOT-MR | |
|
The CAIS PILOT MR end cap for the sliding gate C-profile is installed at the beginning of the guide C-profile. The end cap is attached to the CAIS RUN M gate stop. |
Details
|
|||
|
1 × | Top guide with two rollers for sliding gates | CAIS-FRM2 | |
|
Gate guide for vertical stabilization of the gate in the transverse direction. |
Details
|
|||
|
1 × | Installation manual for the cantilever gate kit |
Download
|
|
|
Installation manual with illustrated wiring diagrams and instructions for programming and pairing remote controls. |
||||
Set of screws and rivet nuts for mounting
Benefits and features of the CAIS-DEMO-MBE-03 kit
- Easy to assemble thanks to well-designed details, and quick to install by bolting the C-profile to the structure, eliminating the need to weld the C-profile.
- Fixing screws and rivet nuts are included for attaching the C-profile to the structure through the holes in the C-profile, spaced at least 400mm apart.
- The untreated, uncoated raw-steel C-profile is individually serial-numbered and 100% tested with the roller carriages. Its accuracy is spot on.
- High-quality roller-carriage bearings. The roller-carriage wheel centers are drilled, not laser-cut.
- Tested from -37°C to +50°C
- German steel. Japanese robots. Made in the Czech Republic.
Example of the suitability of the CAIS-DEMO-MBE-03 kit for building a cantilever sliding gate
The kit is suitable for a clear opening width of up to 4.5 m and a total gate weight of 525 kg. The following drawing shows the dimensions for illustrative clear opening widths, along with suggested suitable structural profiles. The table below lists the dimensions for each clear opening width of a cantilever sliding gate.
Cross-section of the gate with roller carriages and guide
Original manufacturer code: CAIS KIT DEMO MBE 03 1710052
How can I order this item?
Choose the option that suits you:
- order online: use the buy button to add the goods to your shopping cart (you will find the buy button here in the product variants table).
- order by email: place your order at [email protected]
