Aluminium kit for building a cantilever sliding gate up to 4 m
AL| Product availability: | within 3 days | We usually ship the goods within 3 days. |
|---|
Description of Aluminium kit for building a cantilever sliding gate up to 4 m
Note: The KIT is more cost-effective than the individual components . On request, we can adjust the contents of the KIT and apply an appropriate discount. If you have a specific request or would like advice, contact us.
The entire SADA-40 kit is made of aluminium, including the C-profile (6m) and all components.
| The kit includes: | SADA-40 | ||
|---|---|---|---|
 |
2 × | Adjustable swing carriage, 5 rollers | - |
|
Aluminium support carriage with nylon rollers. The nylon rollers support heavy gate loads, prevent wear to the C-profile, and ensure quiet operation. |
|||
 |
1×6 m | Aluminium C-profile 83x79x11 mm, AL | CP-AL-83x79 |
|
A thick-walled aluminium C-shaped guide profile welded to the bottom of the gate, allowing it to run on carriages anchored in a concrete foundation. |
Detail  |
||
 |
1 × | Bottom catcher with stop | - |
|
The guide roller is fitted at the beginning of the C-profile and runs into the bottom stop mounted on the closing post, relieving the gate when it is closed. |
|||
 |
1 × | Bottom receiver pocket - bottom stop | - |
|
Receiver pocket mounted at the bottom of the closing post. It relieves the compressive and tensile forces acting on the carriages when the gate is closed. |
|||
 |
1 × | C-profile end cap | - |
|
The end cap for a sliding gate C-profile is fitted at the beginning and, if needed, at the end of the guide C-profile. It slides into the C-profile and is secured to it with a clamping plate. |
|||
How can I order this item?
Choose the option that suits you:
- order online: use the buy button to add the goods to your shopping cart (you will find the buy button here in the product variants table).
- order by email: place your order at [email protected]
