98x98x5 kit for building a cantilever sliding gate with a passage width of up to 4.5 m, Fe, 9-roller trolleys


Product availability: In stock

We normally dispatch goods within 24 hours.

98x98x5 kit for building a cantilever sliding gate with a passage width of up to 4.5 m, Fe, 9-roller trolleys 98x98x5 kit for building a cantilever sliding gate with a passage width of up to 4.5 m, Fe, 9-roller trolleys
SADA98-9FE-6
In stock
€590.37 excluding VAT
€726.15 including VAT

 pcs
C-channel dimensions Weight
98x98x5 112 kg

Description of 98x98x5 kit for building a cantilever sliding gate with a passage width of up to 4.5 m, Fe, 9-roller trolleys

Component kit for building a self-supporting gate in the highest quality with highly reliable load-bearing bearings. The entire kit except for the C-profile is surface-treated — hot-dip galvanized.

Note: THE KIT compared with buying the components individually, is available at a discounted price. On request, we can customize the contents of the KIT as well as the LENGTH OF THE C-PROFILES and deduct the appropriate discount. If you have a specific request or would like some advice, contact us.

Set SADA98-9FE-6 contains:
Trolley with nine bearing rollers 2 × Trolley with nine bearing rollers V-09-9

All-metal trolley for cantilever sliding gates weighing up to 550 kg and with a passage width of up to 8.5 m. The trolley is supplied with a mounting plate included in the price.

 Details
C-profile 98x98x5mm, unfinished 6 m C-profile 98x98x5mm, unfinished CP-98-1

A thick-walled C-shaped guide profile welded to the bottom of the gate, allowing the gate to run on carriages anchored in a concrete foundation. Unfinished, untreated steel. C-profiles can be joined by welding.

 Details
Lower guide ramp 1 × Lower guide ramp SN-1-98

The guide roller is mounted at the beginning of the C-profile and runs into the lower stop mounted on the closing post, relieving the gate when closed.

 Details
Lower stop, 98×98×5mm 1 × Lower stop, 98×98×5mm DK-1-98

Run-off pocket mounted at the bottom of the gate stop post. Relieves the compressive and tensile forces acting on the roller carriages when the gate is closed.

 Details
C-profile cover cap 1 × C-profile cover cap SK-1-98

The end cap for the sliding gate C-profile is fitted at the beginning and, if required, at the end of the guide C-profile. It slides into the C-profile and is secured to it with a clamping plate tightened with two screws.

 Details

How can I order this item?

Choose the option that suits you:

  1. order online: use the buy button to add the goods to your shopping cart (you will find the buy button here in the product variants table).
  2. order by email: place your order at [email protected]

Ask us anything about 98x98x5 kit for building a cantilever sliding gate with a passage width of up to 4.5 m, Fe, 9-roller trolleys

Product: 98x98x5 kit for building a cantilever sliding gate with a passage width of up to 4.5 m, Fe, 9-roller trolleys
Name:
Email:
Phone:
Message:
This page is protected by Google reCAPTCHA.
Print page Print page