Resetting the NICE Rox drive

Note: this reset will not erase the remote controls.

  1. Disconnect the drive from the power supply.
  2. Press and hold the PROG.
  3. Restore power to the drive (do notrelease the PROG).
  4. Keep holding PROG, after a moment the OKLED lights up, then goes out (keep holding PROG), then the OK OK LED starts flashing; release the PROG button exactly during the third flash (not after it).
  5. The OK LED flashes 5 times to indicate a successful reset.

After the reset, it would probably be a good idea to set up the drive again set :)

Print page Print page