Locking the NICE OX2 receiver memory
This function prevents transmitters from being added to the receiver’s memory “near the receiver.” To enable/disable this function (it is disabled by default, so pairing is possible), proceed as follows:
01. disconnect the receiver from the power supply for at least 5 seconds.
02. connect the receiver to the power supply and press and hold the button until the LED finishes indicating the type of code stored in memory (see details here)
completion is indicated by two short orange flashes. Then release the button.
03. within 5 seconds, press the button repeatedly to select one of the functions (the LED color changes with each press to indicate the currently selected function https://fortamigo.com/connecting-the-nice-ox2-external-receiver-to-the-drive:
LED OFF = memory unlocked
RED LED = remote pairing memory locked
GREEN LED = memory with authorization code locked
ORANGE LED = both methods locked
04. within 5 seconds, press the button on a remote control stored in the receiver’s memory to confirm.
If you frequently change receiver settings, consider purchasing the device OBOX.
