Wiring for the NICE RBA4R10 control unit
For details on which types of cable to use for each component in a drive system with a NICE RBA4R10 control unit, see the following “shopping” list:
Minimum required:
- Power supply – 3×1.5 mm2. If the power cable is longer than 30 m, use a larger size, for example 3 x 2.5mm2
Optional accessories:
- Photocells:
- TX transmitter: 2×0.5 mm2
- RX receiver: 4×0.5 mm2
- If you do not use photocells with the Road drive, inputs 1 and 5 must be connected with a jumper.
- Flashing light:
- for the light: 2×1 mm2
- for the antenna: 50 Ohm shielded coaxial cable (RG58 type)
- Alternatively, a two-core cable (2x 0.5 mm2) if you want to open it with a standard switch, for example
