Wiring for the NICE MC424LR10 control unit (with MCA2R10)
Which types of cables are needed for each component in an operator system with a NICE MC424LR10 control unit (with MCA2R10) can be found in the following “shopping” list:
Minimum required:
- Power supply – 3×1,5 mm2
- Each motor – 3×1,5 mm2 (stranded)
Optional accessories:
- Warning light:
- for the bulb: 2×1 mm2
- for the antenna: shielded coaxial cable with 50 Ohm impedance (RG58 type)
- Photocells:
- TX transmitter: 2×0,5 mm2
- RX receiver: 4×0,5 mm2
- Alternatively, a two-core cable (2x0,5 mm2) if, for example, you want to open the gate with a standard switch.
