Wiring for NICE ROA38R10, ROA39R10, ROA40R10 control units
Which types of cables to use for each component in a drive system with the ROA38R10, ROA39R10, or ROA40R10 control unit can be found in the following “shopping” list:
Minimum requirements:
-
Power supply – 3×1,5 mm2. If the power cable is longer than 30 m, use a larger cross-section, for example 3 x 2,5mm2
Optional accessories:
- Photocells:
- TX transmitter: 2×0,5 mm2
- RX receiver: 4×0,5 mm2
- Warning light:
- for the light: 2×1 mm2
- for the antenna: shielded coaxial cable with an impedance of 50 Ohm (type RG58)
- Alternatively, a two-core cable (2x0,5 mm2) if you want to open it using, for example, a standard switch.
