Key switches for NICE gate operators
You can open an automated gate or barrier using a key switch by simply turning the key. A suitable alternative to a remote control.
NICE Era Key Switch EKS – key switch with a single cylinder, surface-mounted
Control the gate by turning a key using the wiring. Two commands can be issued by turning the key in either direction.
€ excluding VAT 42,84 € including VAT 52,69In stock Details
NICE Era Key Switch EKSEU – key switch with European cylinder, surface-mounted
Control the gate by turning a key using the wiring. Two commands can be issued by turning the key in either direction.
€ excluding VAT 38,40 € including VAT 47,23In stock Details
NICE Era Key Switch EKSIEU - recessed key switch with European cylinder
Control the gate by turning a key using the wiring. Two commands can be issued by turning the key in either direction.
€ excluding VAT 37,97 € including VAT 46,71In stock Details
NICE Era Key Switch EKSI – key switch with a standard cylinder, flush-mounted
Control the gate by turning a key using the wiring. Two commands can be issued by turning the key in either direction.
€ excluding VAT 37,90 € including VAT 46,61within 4 days Details
NICE MOA1 - box for recessed installation of NICE MOSI, MOSIU components
Recessed installation should preferably be planned before building the fence.
€ excluding VAT 3,28 € including VAT 4,03In stock Details
NICE MOA2 - mounting plate for NICE Moon wire components
For a neat finish to the pre-installed cabling.
€ excluding VAT 16,03 € including VAT 19,72In stock Details
NICE MOCA1 – extension for NICE MOCF2 post
For the post with two photocells, you can add a top section for a key switch, keypad, or card reader.
€ excluding VAT 36,34 € including VAT 44,69In stock Details
NICE MOCS - 110 cm aluminium post for a switch (key, card or keypad)
Ideal for controlled vehicle access without a remote control.
€ excluding VAT 46,87 € including VAT 57,64In stock Details
NICE PPK - aluminium post for a keypad, card reader and key switch
Post for keypad, card reader and key switch, height 1020mm
€ excluding VAT 58,38 € including VAT 71,81In stock Details
NICE PPH3 aluminium post for 1 EPM/EPMB photocell
EMP/EMPB photocell post, 500 mm high
€ excluding VAT 40,26 € including VAT 49,52In stock Details
NICE PPH4 aluminum post for EPM/EPMB photocells
Photocell post EMP/EMPB, height 1000mm
€ excluding VAT 54,90 € including VAT 67,53In stock Details
NICE PCM – base plate for MOCS, MOCF, and MOCF2 posts
Set the PCM plates in concrete beforehand, then simply screw the posts into place.
€ excluding VAT 13,75 € including VAT 16,92In stock Details
